Our solutions
Here we are providing you a choosen list out of projects we have made. You may identify yourself with it?
Hardware building blocks
Open Standard Module (OSM) with
NXP i.MX8M Mini
The idea of this building block is to create a new, future proof and versatile standard for small-size, low-cost embedded computer modules.
Open Standard Module (OSM) with
NXP i.MX8M Nano
The idea of this building block is to create a new, future proof and versatile standard for small-size, low-cost embedded computer modules.
SMARC 2.0 Modul with Intel Core Atom®
x5-E39xx Series Processor
This is a building block we are using for different kinds of solutions like web terminals or boxed pcs with advanced performance.
QSeven Compute module with NXP i.MX6 Cortex™ A9 processor
This is a building block we are using for applications based on embedded linux. The goal is to get a nice performace by keeping BOM costs as low as possible.
AMD® Embedded G-series SOC
We are using this single board computer to quickly make complete solutions like touch panels or web based applications.
Boxed computers
Apollo Lake Boxed PC
Computer on module with an Intel Atom x5-E3930 dual-core combined with a custumized baseboard to reach a very low formfactor.
eNUC BOXED PC
Good heat dissipation due to the completely aluminum housing. Small form factor of 109x103x46mm³.
Complete solutions
10" Touch Panel with AMD® G-series
Webpanel for industrial applications.
Resisitive touch for rough environments and interactions with gloved hands.
Splash-proof IP65 with AMD® G-series
eN-GXSOC combined with a waterproof enclosure.
Perfect for web applications. Optional: resistive touch.
7" and 10" Touch front with
ARM-CPU inside
Interface wonder available with two different display sizes (7″ and 10″). Capacitive touch for very easy operation.
Logistic computer
Frontpanel with touch and Profibus to interact with PLCs. Made for industrial environments.
Custom embedded devices
ARM i.MX6 Single Board Computer
It’s a single board computer for printing applications. Besides standart interfaces like LAN, USB and RS232 there are custom sensor interfaces onboard to plug for example light barriers directly to the board.
Motor driver board
Corresponding to the single board computer for printing applications we designed a motor driver board, which fits directly on top. This solutions can drive two step motors and two BLDC motors. Interfaces are CAN, SPI bus.
ARM i.MX6UltraLite Single Board Computer
It’s a Single Board Computer for traffic control systems.
ARM i.MX6 Single Board Computer
It is a single board computer for printing applications. In addition to standard interfaces such as LAN, USB and RS232, there are also various customer-specific interfaces for e.g Lightbarriers, etc. and the option of directly connecting a stepper.
Test solutions
Function Test - Motor Board
Test solution for a motor driver board with CAN and SPI interface.
Function test - ARM CPU Board
Test setup for an ARM CPU board:
- Initial software installation
- Measure important units
- Test interfaces
- Automated test reports